Description
| electronic limit switch |
| cloth relief can be switched on/off | ||
|
Your advantage: End position adjustment possible via switch on the drive head without special adjustment set |
| Reversing can be activated in the outer end position | ||
|
End position adjustment via conventional operating element, e.g. E.g. toggle switch |
|
Can be switched in parallel without cut-off relay | ||
|
Highlight: Auto-install function |
| Soft stop at the top | ||
| Blockage detection |
| Motor protected against overheating | ||
| Automatic curtain length compensation |
| Motor head can be overwound | ||
| Can be optionally activated: cloth tightening function |
| Suitable for right and left-hand installation |
Areas of application
|
|
|
|
|
|
|
|
|
Specifications
| Item number | Designation | Nm | Rpm | L1 | L2 | L3 | ØC | Power in watts | |
| 149 0100 01 | R8-17-E12 | 8 | 17 | 471 | 511 | 528 | 50 | 100 | |
| 149 0100 02 | R12-17-E12 | 12 | 17 | 471 | 511 | 528 | 50 | 110 | |
| 149 0100 03 | R20-17-E12 | 20 | 17 | 500 | 540 | 557 | 50 | 160 | |
| 149 0100 04 | R30-17-E12 | 30 | 17 | 524 | 564 | 581 | 50 | 210 | |
| 149 0100 05 | R40-17-E12 | 40 | 17 | 539 | 579 | 596 | 50 | 260 | |
| 149 0100 06 | R50-11-E11 | 50 | 11 | 553 | 593 | 610 | 50 | 240 |
- Operating voltage: 230V
- End position adjustment: Electronic
- Output drive: for Ø78 grooved pipe
- Blocking detection: with blocking detection
- Obstacle detection: with obstacle detection
- Operating mode: Switches
- Design: Ø50mm
- Product group: Tubular motors Becker
- Strength: 20Nm30Nm40Nm50Nm8Nm12Nm
- Revolutions/min.: 11 rpm.17 rpm.
- Parallel connection: suitable for parallel connection
- Additional Description: for textile sun protection
PDF
Instructions
